ec130/ec130-base.xml

<?xml version="1.0"?>
<!--
************************************************************************
EC 130 simulation config.

************************************************************************

 This file is part of FlightGear, the free flight simulator
 http://www.flightgear.org/

 Copyright (C) 2009 Heiko Schulz, Heiko.H.Schulz@gmx.net
           (C) 2016 Michael Habarta, mhabarta@freenet.de

 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License as
 published by the Free Software Foundation; either version 2 of the
 License, or (at your option) any later version.

 This program is distributed in the hope that it will be useful, but
 WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 General Public License for more details.
-->
<PropertyList>
	<sim>
		<description>Eurocopter EC130</description>
		<author>Heiko Schulz, Melchior Franz (Nasal), Michael Habarta (Model-Details, Animations, Liveries)</author>
		<fuel-fraction type="double">0.6</fuel-fraction>
		<sound>
			<path>Aircraft/ec130/Sounds/sound.xml</path>
			<enabled>false</enabled>
		</sound>
		<airport>
			<runways>
				<start-offset-m>-0.95</start-offset-m>
			</runways>
		</airport>
		<model>
			<ec130>
			  <headsetholder>
                 <position-deg type="float">90.0</position-deg>
               </headsetholder>
				<torque-pct>0</torque-pct>
				<model-info>no detailed info available</model-info>
				<!-- global options for all models/liveries -->
				<state type="int">0</state>
				<rotor-step-deg type="float">-1.0</rotor-step-deg>
				<!-- screen visibility 0: clear, 1: visible, 2: shaded -->
				<cockpit-windscreen-option type="float">1</cockpit-windscreen-option>
				<shadow type="bool">true</shadow>
				<!-- model/livery specific options -->
				<!-- 0: only right, 1: only left, 2: left and right -->
				<antenna_left type="int">0</antenna_left>
				<antenna_tail_front type="bool">false</antenna_tail_front>
				<vor_2_roof type="bool">false</vor_2_roof>
				<adf_bottom type="bool">false</adf_bottom>
				<adf_roof type="bool">false</adf_roof>
				<VUHF type="bool">false</VUHF>
				<VUHF_front type="bool">false</VUHF_front>
				<antenna_flat_tail type="bool">false</antenna_flat_tail>
				<!-- 0: off, 1: front, 2: rear -->
				<antenna_square_tail type="int">0</antenna_square_tail>
				<DME type="bool">false</DME>
				<DME_small type="bool">false</DME_small>
				<copilot_controls type="bool">true</copilot_controls>
				<!-- 4: rescue configuration, 5/6: number of seats  -->
				<interior_passengers type="float">5</interior_passengers>
				<show_gsdi type="bool">false</show_gsdi>
				<wirecutter type="bool">false</wirecutter>
				<mirror type="bool">false</mirror>
				<FLIR type="bool">false</FLIR>
				<emerg_floats type="bool">false</emerg_floats>
				<basket_left type="bool">false</basket_left>
				<basket_right type="bool">false</basket_right>
				<searchlight_a800 type="bool">false</searchlight_a800>
				<searchlight type="bool">false</searchlight>
				<searchlight_filter type="bool">false</searchlight_filter>
				<snowshoes type="bool">false</snowshoes>
				<hoist type="bool">false</hoist>
				<stabi_strobe type="bool">false</stabi_strobe>
				<gear_strobe type="bool">false</gear_strobe>
				<gear_light type="bool">false</gear_light>
				<luggage_wide type="bool">false</luggage_wide>
			</ec130>
			<!-- searchlight default settings -->
			<searchlight>
				<!-- range of lightcone 1: small, 2: medium, 3: large, 4: xlarge -->
				<state-default type="float">3.0</state-default>
				<!-- color 1: white, 2: amber, 3: red, 4: IR filter -->
				<filter-state-default type="int">1</filter-state-default>
				<!-- intensity of light-cone 0: off, 1: low, 2: medium, 3: high -->
				<cone-visibility-default type="float">1.0</cone-visibility-default>
				<!-- slew rate fraction: 1: fast, 2: medium, 3:slow -->
				<slew-rate-frac-default type="int">1</slew-rate-frac-default>
				<!-- initial orientation relative to model -->
				<sx16>
					<!-- heading + left, - right -->
					<heading-default-deg type="float">0.0</heading-default-deg>
					<heading-min-deg type="float">-90.0</heading-min-deg>
					<heading-max-deg type="float">30.0</heading-max-deg>
					<!-- elevation + up, - down -->
					<elevation-default-deg type="float">2.0</elevation-default-deg>
					<elevation-min-deg type="float">-50.0</elevation-min-deg>
					<elevation-max-deg type="float">3.0</elevation-max-deg>
					<slew-rate-deg>18.0</slew-rate-deg>
				</sx16>
				<a800>
					<!-- heading + left, - right -->
					<heading-default-deg type="float">0.0</heading-default-deg>
					<heading-min-deg type="float">120.0</heading-min-deg>
					<heading-max-deg type="float">360.0</heading-max-deg>
					<!-- elevation + up, - down -->
					<elevation-default-deg type="float">0.0</elevation-default-deg>
					<elevation-min-deg type="float">-90.0</elevation-min-deg>
					<elevation-max-deg type="float">35.0</elevation-max-deg>
					<slew-rate-deg>60.0</slew-rate-deg>
				</a800>
			</searchlight>
		</model>
		<fire>
			<enabled type="bool">false</enabled>
			<part-per-sec type="int">0</part-per-sec>
			<life-sec type="float">0</life-sec>
		</fire>
		<smoke>
			<enabled type="bool">false</enabled>
			<part-per-sec type="int">0</part-per-sec>
			<life-sec type="float">0</life-sec>
		</smoke>
		 <rendering>
      <refl_correction type="string">-0.2</refl_correction>
      <refl-type type="string">1</refl-type>
      <fresnel-factor type="string">0.5</fresnel-factor>
    </rendering>
		<systems>
			<path>Aircraft/ec130/Systems/systems.xml</path>
			<autopilot>
				<path>Aircraft/ec130/Systems/130-autopilot.xml</path>
			</autopilot>
			
			<autopilot n="101">
				<name>ec130 instruments filter</name>
				<path>Aircraft/ec130/Models/Instruments/filter.xml</path>
			</autopilot>
			<autopilot n="102">
				<path>Aircraft/ec130/Systems/glass-rain.xml</path>
			</autopilot>
			    <autopilot n="103">
            <path>Aircraft/ec130/Systems/sound-rules.xml</path>
        </autopilot>
			<electrical>
				<path/>
			</electrical>
			<property-rule n="100">
				<name>VEMD</name>
				<path>Aircraft/ec130/Systems/VEMD.xml</path>
			</property-rule>
		</systems>
		<instrumentation>
			<path>Aircraft/ec130/Systems/instruments.xml</path>
		</instrumentation>
		<!--view-->
		<chase-distance-m type="double" archive="y">-15.0</chase-distance-m>
		<view-autozoom-percent-default type="double" userarchive="y">25</view-autozoom-percent-default>
		<view n="0">
			<name>Cockpit View</name>
			<internal type="bool">true</internal>
			<config>
				<x-offset-m archive="y"> -0.67 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.03 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -3.95 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<default-field-of-view-deg type="double">85</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
			</config>
		</view>
		<view n="101">
			<name>Co-Pilot View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<x-offset-m archive="y"> -0.01 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.03 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -3.96 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">85</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
				<limits>
					<enabled type="bool">true</enabled>
					<left>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</left>
					<right>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</right>
				</limits>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="102">
			<name>Front Left Seat View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<x-offset-m archive="y">  0.35 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.05 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -4.10 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
				<limits>
					<enabled type="bool">true</enabled>
					<left>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</left>
					<right>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</right>
				</limits>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="103">
			<name>Front Right Seat View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<!-- Attention: view position is handled in special view handler -->
				<!-- Limits MUST NOT be defined here and are handled in the view handler ! -->
				<x-offset-m archive="y">  0.73 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.05 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -3.93 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="104">
			<name>Rear Left Seat View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<x-offset-m archive="y"> -0.70 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.12 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -2.98 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
				<limits>
					<enabled type="bool">true</enabled>
					<left>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</left>
					<right>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</right>
				</limits>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="105">
			<name>Rear Mid Left Seat View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<x-offset-m archive="y"> -0.23 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.12 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -2.98 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
				<limits>
					<enabled type="bool">true</enabled>
					<left>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</left>
					<right>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</right>
				</limits>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="106">
			<name>Rear Mid Right Seat View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<x-offset-m archive="y">  0.25 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.11 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -2.98 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
				<limits>
					<enabled type="bool">true</enabled>
					<left>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</left>
					<right>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</right>
				</limits>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="107">
			<name>Patient View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<!-- Attention: view position is handled in special view handler -->
				<!-- Limits are handled there too and MUST NOT be defined here ! -->
				<x-offset-m archive="y">  0.53 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.11 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -2.98 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="108">
			<name>Rear Right Seat View</name>
			<internal type="bool">true</internal>
			<type>lookfrom</type>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.5f</ground-level-nearplane-m>
				<x-offset-m archive="y">  0.70 </x-offset-m>
				<!--right-->
				<y-offset-m archive="y">  0.15 </y-offset-m>
				<!--up   -->
				<z-offset-m archive="y"> -2.98 </z-offset-m>
				<!--back -->
				<pitch-offset-deg>-15</pitch-offset-deg>
				<heading-offset-deg>0</heading-offset-deg>
				<default-field-of-view-deg type="double">75</default-field-of-view-deg>
				<dynamic-view type="bool">true</dynamic-view>
				<limits>
					<enabled type="bool">true</enabled>
					<left>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</left>
					<right>
						<heading-max-deg type="double">140</heading-max-deg>
						<x-offset-max-m type="double">0.15</x-offset-max-m>
						<x-offset-threshold-deg type="double">65</x-offset-threshold-deg>
					</right>
				</limits>
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="109">
			<name>Tail Camera View</name>
			<type>lookfrom</type>
			<internal type="bool">false</internal>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.01f</ground-level-nearplane-m>
				<default-field-of-view-deg type="double">50</default-field-of-view-deg>
				<pitch-offset-deg>0</pitch-offset-deg>
				<x-offset-m archive="y"> 0.000 </x-offset-m>
				<!--Right-->
				<y-offset-m archive="y">-1.150 </y-offset-m>
				<!--Up   -->
				<z-offset-m archive="y"> 3.000 </z-offset-m>
				<!--Back -->
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="110">
			<name>Rotor Camera View</name>
			<type>lookat</type>
			<internal type="bool">false</internal>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<at-model type="bool">true</at-model>
				<at-model-idx type="int">0</at-model-idx>
				<target-y-offset-m type="double"> 1.5</target-y-offset-m>
				<target-z-offset-m type="double">-2.0</target-z-offset-m>
				<default-field-of-view-deg type="double">50</default-field-of-view-deg>
				<pitch-offset-deg>0</pitch-offset-deg>
				<x-offset-m archive="y"> 0.000 </x-offset-m>
				<!--Right-->
				<y-offset-m archive="y"> 0.000 </y-offset-m>
				<!--Up   -->
				<z-offset-m archive="y">-3.000 </z-offset-m>
				<!--Back -->
			</config>
			<enabled type="bool">true</enabled>
		</view>
		<view n="111">
			<name>Searchlight Watch View</name>
			<type>lookfrom</type>
			<internal type="bool">false</internal>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.01f</ground-level-nearplane-m>
				<default-field-of-view-deg type="double">45</default-field-of-view-deg>
				<pitch-offset-deg>-20</pitch-offset-deg>
				<x-offset-m archive="y">-1.100 </x-offset-m>
				<!--Right-->
				<y-offset-m archive="y">-0.600 </y-offset-m>
				<!--Up   -->
				<z-offset-m archive="y">-3.500 </z-offset-m>
				<!--Back -->
			</config>
			<enabled type="bool">true</enabled>
			<enabled_flag type="bool">true</enabled_flag>
		</view>
		<view n="112">
			<name>Searchlight Follow View</name>
			<type>lookfrom</type>
			<internal type="bool">false</internal>
			<config>
				<from-model type="bool">true</from-model>
				<from-model-idx type="int">0</from-model-idx>
				<ground-level-nearplane-m type="double">0.01f</ground-level-nearplane-m>
				<default-field-of-view-deg type="double">20</default-field-of-view-deg>
				<x-offset-m archive="y"> -1.200 </x-offset-m>
				<!--Right-->
				<y-offset-m archive="y"> -1.220 </y-offset-m>
				<!--Up   -->
				<z-offset-m archive="y"> -4.940 </z-offset-m>
				<!--Back -->
			</config>
			<enabled type="bool">true</enabled>
			<enabled_flag type="bool">true</enabled_flag>
		</view>
		<weight n="0">
			<name>Pilot</name>
			<weight-lb type="double">180</weight-lb>
			<min-lb>30</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<weight n="1">
			<name>Co-Pilot</name>
			<weight-lb type="double">30</weight-lb>
			<min-lb>30</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<weight n="2">
			<name>Front Left</name>
			<weight-lb type="double">0</weight-lb>
			<min-lb>0</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<weight n="3">
			<name>Front Right</name>
			<weight-lb type="double">180</weight-lb>
			<min-lb>30</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<weight n="4">
			<name>Rear Left</name>
			<weight-lb type="double">190</weight-lb>
			<min-lb>30</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<weight n="5">
			<name>Rear Mid Left</name>
			<weight-lb type="double">30</weight-lb>
			<min-lb>30</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<weight n="6">
			<name>Rear Mid Right</name>
			<weight-lb type="double">0</weight-lb>
			<max-lb>300</max-lb>
		</weight>
		<weight n="7">
			<name>Rear Right</name>
			<weight-lb type="double">190</weight-lb>
			<min-lb>30</min-lb>
			<max-lb>330</max-lb>
		</weight>
		<!-- flag meaning:                                                   -->
		<!--  ems: 0 ... not in EMS,  =1 ... yes in EMS,  2 ... only in EMS  -->
		<!-- wide: 0 ... not in wide, =1 ... yes in wide, 2 ... only in wide -->
		<weight n="8">
			<name>Luggage Left</name>
			<weight-lb type="double">0</weight-lb>
			<max-lb>300</max-lb>
			<luggage-cnt type="int">0</luggage-cnt>
			<luggage n="0">
				<weight-lb type="double">50</weight-lb>
			</luggage>
			<luggage n="1">
				<weight-lb type="double">30</weight-lb>
			</luggage>
			<luggage n="2">
				<weight-lb type="double">30</weight-lb>
			</luggage>
			<luggage n="3">
				<weight-lb type="double">30</weight-lb>
			</luggage>
			<luggage n="4">
				<weight-lb type="double">30</weight-lb>
			</luggage>
			<!-- wide box only -->
			<luggage n="5">
				<weight-lb type="double">20</weight-lb>
				<wide type="int">2</wide>
			</luggage>
			<luggage n="6">
				<weight-lb type="double">20</weight-lb>
				<wide type="int">2</wide>
			</luggage>
			<luggage n="7">
				<weight-lb type="double">20</weight-lb>
				<wide type="int">2</wide>
			</luggage>
			<luggage n="8">
				<weight-lb type="double">20</weight-lb>
				<wide type="int">2</wide>
			</luggage>
		</weight>
		<!-- flag meaning:                                                   -->
		<!--  ems: 0 ... not in EMS,  =1 ... yes in EMS,  2 ... only in EMS  -->
		<!-- wide: 0 ... not in wide, =1 ... yes in wide, 2 ... only in wide -->
		<weight n="9">
			<name>Luggage Right</name>
			<weight-lb type="double">60</weight-lb>
			<max-lb>300</max-lb>
			<luggage-cnt type="int">0</luggage-cnt>
			<luggage-cnt-ems type="int">0</luggage-cnt-ems>
			<luggage n="0">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="1">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="2">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="3">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="4">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="5">
				<weight-lb type="double">20</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="6">
				<weight-lb type="double">20</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="7">
				<weight-lb type="double">20</weight-lb>
				<ems type="int">0</ems>
			</luggage>
			<!-- wide box only -->
			<luggage n="8">
				<weight-lb type="double">20</weight-lb>
				<wide type="int">2</wide>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="9">
				<weight-lb type="double">30</weight-lb>
				<wide type="int">2</wide>
				<ems type="int">0</ems>
			</luggage>
			<luggage n="10">
				<weight-lb type="double">20</weight-lb>
				<wide type="int">2</wide>
				<ems type="int">0</ems>
			</luggage>
			<!-- ems only -->
			<luggage n="11">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">2</ems>
			</luggage>
			<luggage n="12">
				<weight-lb type="double">30</weight-lb>
				<ems type="int">2</ems>
			</luggage>
		</weight>
		<weight n="10">
			<name>Luggage Back</name>
			<weight-lb type="double">60</weight-lb>
			<max-lb>176</max-lb>
			<luggage-cnt type="int">0</luggage-cnt>
			<luggage n="0">
				<weight-lb type="double">30</weight-lb>
			</luggage>
			<luggage n="1">
				<weight-lb type="double">30</weight-lb>
			</luggage>
		</weight>
		<weight n="11">
			<name>Basket Left</name>
			<weight-lb type="double">0</weight-lb>
			<max-lb>200</max-lb>
			<luggage-cnt type="int">0</luggage-cnt>
			<luggage n="0">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="1">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="2">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="3">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="4">
				<weight-lb type="double">20</weight-lb>
			</luggage>
		</weight>
		<weight n="12">
			<name>Basket Right</name>
			<weight-lb type="double">0</weight-lb>
			<max-lb>200</max-lb>
			<luggage-cnt type="int">0</luggage-cnt>
			<luggage n="0">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="1">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="2">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="3">
				<weight-lb type="double">20</weight-lb>
			</luggage>
			<luggage n="4">
				<weight-lb type="double">20</weight-lb>
			</luggage>
		</weight>
		<weight n="13">
			<name>Equipment</name>
			<weight-lb type="double">0</weight-lb>
			<max-lb>800</max-lb>
		</weight>
		<hitches>
			<!-- make sure some properties do exist, when the list for multiplayer transfer is defined-->
			<!-- they need to be in the same value, as they are initialized in the FDM,
           to get the same values after reset should fix this somehow-->
			<aerotow>
				<tow>
					<length type="float">30</length>
					<elastic-constant type="float">10000</elastic-constant>
					<weight-per-m-kg-m type="float">0.035</weight-per-m-kg-m>
					<dist type="float">1</dist>
					<connected-to-property-node type="bool"/>
					<brake-force type="float">100000</brake-force>
					<connected-to-ai-or-mp-callsign type="string">*</connected-to-ai-or-mp-callsign>
					<end-force-x type="float">0</end-force-x>
					<end-force-y type="float">0</end-force-y>
					<end-force-z type="float">0</end-force-z>
				</tow>
				<speed-in-tow-direction type="float">0</speed-in-tow-direction>
				<open type="bool">true</open>
				<x-m> -1.830 </x-m>
				<y-m>  0.000 </y-m>
				<z-m> -1.510 </z-m>
				<local-pos-x type="float">-1.86</local-pos-x>
				<local-pos-y type="float">0</local-pos-y>
				<local-pos-z type="float">-1.54</local-pos-z>
				<is-slave type="bool">false</is-slave>
			</aerotow>
		</hitches>
		<multiplay>
			<generic>
				<!-- wake control 
				<int n="0" alias="/gear/gear/ground-is-solid"/>-->
				<!-- lights -->
				<int n="1" alias="/systems/electrical/outputs/taxi-light"/>
				<int n="2" alias="/systems/electrical/outputs/nav-lights"/>
				<int n="3" alias="/controls/lighting/strobe-state/state"/>
				<int n="4" alias="/systems/electrical/outputs/landing-light"/>
				<int n="5" alias="/systems/electrical/outputs/beacon"/>
				<!-- equipment -->
				<int n="6" alias="/controls/electric/external-power"/>
				<int n="7" alias="/sim/model/ec130/stabi_strobe"/>
				<int n="8" alias="/sim/model/ec130/gear_strobe"/>
				<int n="9" alias="/sim/model/ec130/gear_light"/>
				<int n="10" alias="/sim/model/ec130/emerg_floats"/>
				<int n="11" alias="/sim/model/ec130/searchlight"/>
				<int n="12" alias="/sim/model/ec130/hoist"/>
				<int n="13" alias="/sim/model/ec130/basket_left"/>
				<int n="14" alias="/sim/model/ec130/basket_right"/>
				<int n="15" alias="/sim/model/ec130/snowshoes"/>
				<int n="16" alias="/sim/model/ec130/mirror"/>
				<int n="17" alias="/sim/model/ec130/FLIR"/>
				<int n="18" alias="/sim/model/ec130/luggage_wide"/>
				<int n="19" alias="/sim/model/ec130/wirecutter"/>
				<!-- floats -->
				<float n="0" alias="/gear/gear[6]/position-norm"/>
				<!-- wake control -->
				<float n="1" alias="/orientation/pitch-deg"/>
				<float n="2" alias="/orientation/roll-deg"/>
				<float n="3" alias="/rotors/main/torque"/>
				<float n="4" alias="/position/gear-agl-m"/>
				<!-- doors -->
				<float n="5" alias="/sim/model/ec130/doors/frontl/position-norm"/>
				<float n="6" alias="/sim/model/ec130/doors/frontr/position-norm"/>
				<float n="7" alias="/sim/model/ec130/doors/passengerl/position-norm"/>
				<float n="8" alias="/sim/model/ec130/doors/passengerr/position-norm"/>
				<float n="9" alias="/sim/model/ec130/doors/luggagel/position-norm"/>
				<float n="10" alias="/sim/model/ec130/doors/luggager/position-norm"/>
				<float n="11" alias="/sim/model/ec130/doors/door/position-norm"/>
				<float n="12" alias="/sim/model/ec130/doors/basketl/position-norm"/>
				<float n="13" alias="/sim/model/ec130/doors/basketr/position-norm"/>
				<!-- searchlight SX16 -->
				<float n="14" alias="/controls/electric/engine/generator"/>
				<float n="15" alias="/sim/model/searchlight/heading-deg"/>
				<float n="16" alias="/sim/model/searchlight/elevation-deg"/>
				<float n="17" alias="/sim/model/searchlight/state"/>
				<float n="18" alias="/sim/model/searchlight/active"/>
				<float n="19" alias="/sim/model/searchlight/paused"/>
			</generic>
		</multiplay>
		<flight-recorder include="Systems/flight-recorder.xml"/>
		<help>
			<key>
				<name>-----</name>
				<desc>---- startup ----</desc>
			</key>
			<key>
				<name>Alt-p</name>
				<desc>toggle external Power</desc>
			</key>
			<key>
				<name>AltGr-p</name>
				<desc>toggle Fuel Pump</desc>
			</key>
			<key>
				<name>Ctrl-e</name>
				<desc>Autostart</desc>
			</key>
			<key>
				<name>Shift-E</name>
				<desc>Autoshutdown</desc>
			</key>
			<key>
				<name>r</name>
				<desc>apply Rotor Brake</desc>
			</key>
			<key>
				<name>Shift-R</name>
				<desc>toggle Rotor Brake</desc>
			</key>
			<key>
				<name>Alt-r</name>
				<desc>toggle Rotor Brake Lock</desc>
			</key>
			<key>
				<name>Alt-c</name>
				<desc>toggle Cutoff Lever</desc>
			</key>
			<key>
				<name>AltGr-c</name>
				<desc>toggle Cutoff Lever Guard</desc>
			</key>
			<key>
				<name>Alt-t</name>
				<desc>Twist Grip +</desc>
			</key>
			<key>
				<name>AltGr-t</name>
				<desc>Twist Grip -</desc>
			</key>
			<key>
				<name>Alt-h</name>
				<desc>toggle Horn</desc>
			</key>
			<key>
				<name>Alt-w</name>
				<desc>W/LT TST (Warning Test)</desc>
			</key>
			<key>
				<name>-----</name>
				<desc>---- flight ----</desc>
			</key>
			<!-- doesn't work for RC radio -->
			<key>
				<name>f</name>
				<desc>Force Trim Release</desc>
			</key>
			<key>
				<name>t</name>
				<desc>direct trim Aileron/Elevator</desc>
			</key>
			<key>
				<name>Shift-T</name>
				<desc>direct trim Rudder</desc>
			</key>
			<key>
				<name>a</name>
				<desc>set Collective to Zero</desc>
			</key>
			<key>
				<name>-----</name>
				<desc>---- doors ----</desc>
			</key>
			<key>
				<name>1</name>
				<desc>toggle Pilot Door</desc>
			</key>
			<key>
				<name>2</name>
				<desc>toggle Front Door right</desc>
			</key>
			<key>
				<name>3</name>
				<desc>toggle Back Door left</desc>
			</key>
			<key>
				<name>4</name>
				<desc>toggle Back Door right</desc>
			</key>
			<key>
				<name>d</name>
				<desc>toggle Pilot Door</desc>
			</key>
			<key>
				<name>Shift-D</name>
				<desc>toggle Passenger Doors</desc>
			</key>
			<key>
				<name>Ctrl-d</name>
				<desc>toggle all Doors</desc>
			</key>
			<key>
				<name>Alt-d</name>
				<desc>toggle Luggage Doors</desc>
			</key>
			<key>
				<name>Alt-b</name>
				<desc>toggle Basket Covers</desc>
			</key>
			<key>
				<name>AltGr-d</name>
				<desc>toggle Pilot Window</desc>
			</key>
			<key>
				<name>-----</name>
				<desc>---- light ----</desc>
			</key>
			<key>
				<name>L</name>
				<desc>toggle Taxi Light</desc>
			</key>
			<key>
				<name>Shift-L</name>
				<desc>toggle Landing Light</desc>
			</key>
			<key>
				<name>AltGr-L</name>
				<desc>toggle Search Light ON/OFF</desc>
			</key>
			<key>
				<name>Ctrl-L</name>
				<desc>cycle Slew Rate</desc>
			</key>
			<key>
				<name>j/Shift-J</name>
				<desc>rotate Search Light left/right</desc>
			</key>
			<key>
				<name>k/Shift-K</name>
				<desc>rotate Search Light down/up</desc>
			</key>
			<key>
				<name>s</name>
				<desc>cycle Search Light Focus</desc>
			</key>
			<key>
				<name>Shift-S</name>
				<desc>toggle/cycle Search Light Filter(s)</desc>
			</key>
			<key>
				<name>Alt-s</name>
				<desc>toggle Stabilization (A800)</desc>
			</key>
			<key>
				<name>Ctrl-p</name>
				<desc>pause Search Light</desc>
			</key>
			<key>
				<name>Ctrl-s</name>
				<desc>reset Search Light</desc>
			</key>
			<key>
				<name>Alt-L</name>
				<desc>cycle Light-Cone Visibility</desc>
			</key>
			<key>
				<name>-----</name>
				<desc>---- equipment ----</desc>
			</key>
			<key>
				<name>Shift-F</name>
				<desc>toggle Emergency Floats armed</desc>
			</key>
			<key>
				<name>Alt-f</name>
				<desc>inflate/repack Emergency Floats</desc>
			</key>
			<key>
				<name>o/Shift-O</name>
				<desc>close/open Hook</desc>
			</key>
			<!--
      <key>
        <name>Ctrl-o</name>
        <desc>Find Object to tow</desc>
      </key>
  -->
			<key>
				<name>-----</name>
				<desc>---- simulation ----</desc>
			</key>
			<key>
				<name>Alt-o</name>
				<desc>Configuration Dialog</desc>
			</key>
			<key>
				<name>AltGr-o</name>
				<desc>Simulation Options</desc>
			</key>
			<key>
				<name>Alt-a</name>
				<desc>Antenna Setup</desc>
			</key>
			<key>
				<name>Alt-i</name>
				<desc>Model/Operator Info</desc>
			</key>
			<key>
				<name>Alt-k</name>
				<desc>cycle Rotor Wake Visibility</desc>
			</key>
			<key>
				<name>:A*</name>
				<desc>Multi-Key Commands</desc>
			</key>
			<!--
      <key>
        <name>Alt-g</name>
        <desc>toggle GSDI (Ground Speed/Drift Indicator)</desc>
      </key>
  -->
		</help>
		<checklists include="Tutorials/ec130-checklists.xml"/>
		<tutorials include="Tutorials/ec130_tutorials.xml"/>
		<menubar>
			<default>
				<menu n="10">
					<label>EC130/H130</label>
					<enabled type="bool">true</enabled>
					<!-- ATTENTION: if menubar definiton is changed below make sure
             to cross-check the following code for consistent enable/disable:
               - Nasal start script below
               - Dialog: ec130-config-dialog.xml
        -->
					<!-- 0 -->
					<item>
						<label>Configuration (Livery,Payload,...)</label>
						<key>Alt-o</key>
						<binding>
							<command>nasal</command>
							<script>
              if ( getprop("gear/gear[0]/wow") ) {
                if ( getprop("/sim/model/ec130/config_dialog_active") ) {
                  setprop("/sim/model/ec130/config_dialog_active",0);
                }
                ec130.config_dialog.open();
              } else {
                screen.log.write("Only possible on ground !!!");
              }
            </script>
						</binding>
					</item>
					<!-- 1 -->
					<item>
						<label>Operator/Model Info</label>
						<key>Alt-i</key>
						<binding>
							<command>nasal</command>
							<script><!-- toggle config dialog because info and config are linked -->
              if ( getprop("/sim/model/ec130/config_dialog_active") ) {
                <!-- use write because popupTip gets hidden behind open dialog -->
                screen.log.write("Close Config Dialog or use '?' Button !");
              } else {
                if ( getprop("/sim/model/ec130/info_dialog_active") ) {
                  setprop("/sim/model/ec130/info_dialog_active",0);
                }
                ec130.model_info_dialog.open();
              }
            </script>
						</binding>
					</item>
					<!-- 2 -->
					<item>
						<label>Simulation Options</label>
						<key>AltGr-o</key>
						<binding>
							<command>nasal</command>
							<script>
              ec130.options_dialog.toggle();
            </script>
						</binding>
					</item>
					<!-- 3 -->
					<item>
						<label>Toggle External Power</label>
						<key>Alt-p</key>
						<binding>
							<command>nasal</command>
							<script>ec130.toggle_powersupply()</script>
						</binding>
					</item>
					<!-- 4 -->
					<item>
						<label>Autostart</label>
						<key>Ctrl-e</key>
						<binding>
							<command>nasal</command>
							<script>ec130.autostart()</script>
						</binding>
					</item>
					<!-- 5 -->
					<item>
						<label>Autoshutdown</label>
						<key>Shift-E</key>
						<binding>
							<command>nasal</command>
							<script>ec130.autoshutdown()</script>
						</binding>
					</item>
					<!-- 6 -->
					<item>
						<label>Repack Emergency Floats</label>
						<key>Alt-f</key>
						<binding>
							<command>nasal</command>
							<script>
                if ( getprop("/sim/model/ec130/emerg_floats") and getprop("/controls/gear/floats-inflat") ) {
                  if ( getprop("gear/gear[0]/wow") or getprop("gear/gear[1]/wow") or getprop("gear/gear[2]/wow") or getprop("gear/gear[3]/wow") ) {
                    setprop("/controls/gear/floats-inflat",0);
                    setprop("/controls/gear/floats-armed",0);
                  } else {
                    screen.log.write("Repack only possible on ground !!!");
                  }
                } else {
                    screen.log.write("already packed ...");
                }
              </script>
						</binding>
					</item>
				</menu>
			</default>
		</menubar>
	</sim>
	<consumables>
		<fuel>
			<tank>
				<name>Main</name>
				<selected type="bool" write="n">1</selected>
				<density-ppg type="double" write="n">6.682</density-ppg>
			</tank>
		</fuel>
	</consumables>
	<controls>
		<gear>
			<floats-inflat type="bool">false</floats-inflat>
			<floats-armed type="bool">false</floats-armed>
		</gear>
		<rotor>
			<brake type="double">1</brake>
			<brake-locked type="bool">1</brake-locked>
			<reltarget type="double">0</reltarget>
			<maxreltorque type="double">0</maxreltorque>
		</rotor>
		<engines>
			<engine n="0">
				<magnetos>1</magnetos>
				<propeller-pitch alias="/controls/engines/power-trim"/>
				<mixture alias="/controls/engines/power-balance"/>
				<startselector type="bool">0</startselector>
				<switchguard type="bool">0</switchguard>
				<cutoff-norm type="bool">true</cutoff-norm>
				<!-- doesn't seem to work for initialization
      <oil-pressure-low type ="double">0</oil-pressure-low>
      <oil-pressure-norm type ="double">0</oil-pressure-norm>
      <oil-pressure-bar type ="double">0</oil-pressure-bar>
-->
			</engine>
			<engine n="1">
				<magnetos>1</magnetos>
				<propeller-pitch alias="/controls/engines/power-trim"/>
				<mixture alias="/controls/engines/power-balance"/>
				<throttle alias="/controls/engines/engine[0]/throttle"/>
			</engine>
			<power-trim type="double">0</power-trim>
			<power-balance type="double">0</power-balance>
		</engines>
		<lighting>
			<beacon type="bool">false</beacon>
			<strobe type="bool">false</strobe>
			<nav-lights type="bool">false</nav-lights>
		</lighting>
	</controls>
	<engines>
		<engine n="0">
			<tot-degc>0</tot-degc>
			<n1-pct>0</n1-pct>
		</engine>
	</engines>
	<instrumentation>
		<kcs55 include="Systems/kcs55.xml"/>
		<gsdi>
			<serviceable type="bool">true</serviceable>
		</gsdi>
		<attitude-indicator>
			<serviceable type="bool">false</serviceable>
			<caged type="bool">false</caged>
			<horizon-offset-deg type="double">0</horizon-offset-deg>
		</attitude-indicator>
		<VEMD>
			<FLI>
				<FLI-filter type="double">0.0</FLI-filter>
			</FLI>
		</VEMD>
	</instrumentation>
	<input>
		<keyboard include="Models/SearchLight/searchlight_bindings.xml">
			<!-- multi-key commands -->
			<multikey include="Systems/ec130-multikey.xml"/>
			<key n="97">
				<name>a</name>
				<desc>Set collective to zero</desc>
				<binding>
					<command>nasal</command>
					<script>interpolate("/controls/engines/engine/throttle", 1.0, 1.25)</script>
				</binding>
			</key>
			<key n="5">
				<name>Ctrl-e</name>
				<desc>Autostart</desc>
				<binding>
					<condition>
						<property>/sim/signals/fdm-initialized</property>
					</condition>
					<command>nasal</command>
					<script>ec130.autostart()</script>
				</binding>
			</key>
			<key n="69">
				<name>Shift-E</name>
				<desc>Autoshutdown</desc>
				<binding>
					<command>nasal</command>
					<script>ec130.autoshutdown()</script>
				</binding>
			</key>
			<key n="114">
				<name>r</name>
				<desc>Apply rotor brake</desc>
				<repeatable type="bool">false</repeatable>
				<binding>
					<command>nasal</command>
					<script>
            if ( getprop("/controls/rotor/brake-locked") ) {
              screen.log.write("Rotorbrake is locked !!!");
            } else {
              if ( getprop("/controls/rotor/brake") &lt; 1.0 ) {
                setprop("/controls/rotor/brake-engaged",0);
                interpolate("/controls/rotor/brake", 1.0, 1);
                gui.popupTip("Rotorbrake active ...", 20);
              } else {
                setprop("/controls/rotor/brake-engaged",1);
                if ( getprop("/controls/rotor/brake-locked") ) {
                  screen.log.write("Rotorbrake is locked !!!");
                } else {
                  screen.log.write("Rotorbrake is engaged !!!");
                }
              }
            }
          </script>
				</binding>
				<mod-up>
					<binding>
						<command>nasal</command>
						<script>
            if ( !getprop("/controls/rotor/brake-locked") ) {
              if ( !getprop("/controls/rotor/brake-engaged") ) {
                interpolate("/controls/rotor/brake", 0.0, 1);
                gui.popupTip("Rotorbrake released");
              }
            }
          </script>
					</binding>
				</mod-up>
			</key>
			<key n="82">
				<name>Shift-R</name>
				<desc>Toggle rotor brake</desc>
				<repeatable type="bool">false</repeatable>
				<binding>
					<command>nasal</command>
					<script>ec130.toggle_rotorbrake();</script>
				</binding>
				<mod-up>
					<binding>
						<command>null</command>
					</binding>
				</mod-up>
			</key>
			<key n="114">
				<mod-alt>
					<name>Alt-r</name>
					<desc>toggle rotor brake lock</desc>
					<repeatable type="bool">false</repeatable>
					<binding>
						<command>nasal</command>
						<script>
            if ( getprop("/controls/rotor/brake-locked") ) {
              setprop("/controls/rotor/brake-locked",0);
              gui.popupTip("Rotorbrake unlocked", 2);
            } else {
              setprop("/controls/rotor/brake-locked",1);
              gui.popupTip("Rotorbrake locked", 2);
            }
          </script>
					</binding>
					<mod-up>
						<binding>
							<command>null</command>
						</binding>
					</mod-up>
				</mod-alt>
			</key>
			<key n="99">
				<mod-alt>
					<name>Alt-c</name>
					<desc>toggle Cutoff lever</desc>
					<binding>
						<command>nasal</command>
						<script>ec130.toggle_cutoff();</script>
					</binding>
				</mod-alt>
			</key>
			<key n="99">
				<mod-alt>
					<mod-ctrl>
						<name>AltGr-c</name>
						<desc>toggle Cutoff lever guard</desc>
						<binding>
							<condition>
								<not>
									<property>controls/engines/engine/cutoff</property>
								</not>
							</condition>
							<command>nasal</command>
							<script>
             if ( getprop("/controls/engines/engine/cutoffguard") ) {
               setprop("/controls/engines/engine/cutoffguard",0);
               gui.popupTip("Cutoff unlocked", 2);
             } else {
               setprop("/controls/engines/engine/cutoffguard",1);
               gui.popupTip("Cutoff locked", 2);
             }
           </script>
						</binding>
					</mod-ctrl>
				</mod-alt>
			</key>
			<key n="70">
				<name>Shift-F</name>
				<desc>toggle Emergency Floats armed</desc>
				<binding>
					<command>nasal</command>
					<script>
            var f = getprop("/controls/gear/floats-armed");
            if ( getprop("/sim/model/ec130/emerg_floats") ) {
              setprop("/controls/gear/floats-armed",!f);
              gui.popupTip("Floats " ~ (f ? "disabled !" : "armed !"));
            } else {
              screen.log.write("NO Floats available !!!");
            }
          </script>
				</binding>
			</key>
			<key n="102">
				<mod-alt>
					<name>Alt-f</name>
					<desc>inflate/repack Emergency Floats</desc>
					<binding>
						<command>nasal</command>
						<script>ec130.toggle_floats();</script>
					</binding>
				</mod-alt>
			</key>
			<key n="100">
				<name>d</name>
				<desc>toggle Pilot door</desc>
				<binding>
					<command>nasal</command>
					<script>
            doors.doorsystem.frontlexport();
          </script>
				</binding>
				<mod-alt>
					<name>Alt-d</name>
					<desc>toggle luggage doors</desc>
					<binding>
						<command>nasal</command>
						<script>
            doors.doorsystem.luggagelexport();
            doors.doorsystem.luggagerexport();
            doors.doorsystem.doorbexport();
          </script>
					</binding>
					<mod-ctrl>
						<name>AltGr-d</name>
						<desc>toggle pilot window</desc>
						<binding>
							<command>nasal</command>
							<script>
            doors.doorsystem.pilotwexport();
          </script>
						</binding>
					</mod-ctrl>
				</mod-alt>
			</key>
			<key n="98">
				<name>b</name>
				<mod-alt>
					<name>Alt-b</name>
					<desc>toggle basket covers</desc>
					<binding>
						<command>nasal</command>
						<script>
            doors.doorsystem.basketlexport();
            doors.doorsystem.basketrexport();
          </script>
					</binding>
				</mod-alt>
			</key>
			<key n="68">
				<name>D</name>
				<desc>toggle Passenger doors</desc>
				<binding>
					<command>nasal</command>
					<script>
            doors.doorsystem.frontrexport();
            doors.doorsystem.passengerlexport();
          </script>
				</binding>
			</key>
			<key n="4">
				<name>Ctrl-d</name>
				<desc>toggle all doors</desc>
				<binding>
					<command>nasal</command>
					<script>ec130.toggle_all_doors();</script>
				</binding>
			</key>
			<key n="49">
				<name>1</name>
				<desc>toggle front door left (pilot)</desc>
				<binding>
					<command>nasal</command>
					<script>
            doors.doorsystem.frontlexport();
          </script>
				</binding>
			</key>
			<key n="50">
				<name>2</name>
				<desc>toggle front door right</desc>
				<binding>
					<command>nasal</command>
					<script>
            doors.doorsystem.frontrexport();
          </script>
				</binding>
			</key>
			<key n="51">
				<name>3</name>
				<desc>toggle back door left</desc>
				<binding>
					<command>nasal</command>
					<script>
            doors.doorsystem.passengerlexport();
          </script>
				</binding>
			</key>
			<key n="52">
				<name>4</name>
				<desc>toggle back door right</desc>
				<binding>
					<command>nasal</command>
					<script>
            doors.doorsystem.passengerrexport();
          </script>
				</binding>
			</key>
			<key n="108">
				<name>L</name>
				<desc>toggle Taxi Light</desc>
				<binding>
					<command>property-toggle</command>
					<property>controls/lighting/taxi-light</property>
				</binding>
			</key>
			<key n="76">
				<name>Shift-L</name>
				<desc>toggle Landing Light</desc>
				<binding>
					<command>property-toggle</command>
					<property>controls/lighting/landing-lights</property>
				</binding>
			</key>
			<key n="107">
				<mod-alt>
					<name>Alt-k</name>
					<desc>cycle wake visible</desc>
					<binding>
						<command>nasal</command>
						<script>ec130.cycle_wakes()</script>
					</binding>
				</mod-alt>
			</key>
			<key n="97">
				<mod-alt>
					<name>Alt-a</name>
					<desc>Antenna Setup</desc>
					<binding>
						<command>nasal</command>
						<script>
              if ( getprop("gear/gear[0]/wow") ) {
                if ( getprop("/sim/model/ec130/config_dialog_active") ) {
                  ec130.config_dialog.toggle();
                }
                if ( getprop("/sim/model/ec130/antenna_dialog_active") ) {
                  setprop("/sim/model/ec130/antenna_dialog_active",0);
                }
                ec130.antenna_config_dialog.toggle();
              } else {
                screen.log.write("Only possible on ground !!!");
              }
            </script>
					</binding>
				</mod-alt>
			</key>
			<key n="103">
				<mod-alt>
					<name>Alt-g</name>
					<desc>Show/hide GSDI</desc>
					<binding>
						<command>property-toggle</command>
						<property>/sim/model/ec130/show_gsdi</property>
					</binding>
				</mod-alt>
			</key>
			<key n="104">
				<mod-alt>
					<name>Alt-h</name>
					<desc>toggle Horn</desc>
					<binding>
						<command>property-toggle</command>
						<property>/controls/electric/horn</property>
					</binding>
				</mod-alt>
			</key>
			<key n="105">
				<mod-alt>
					<name>Alt-i</name>
					<desc>Model/Operator Info</desc>
					<binding>
						<command>nasal</command>
						<script>
            if ( getprop("/sim/model/ec130/config_dialog_active") ) {
              ec130.config_dialog.toggle();
            }
            if ( getprop("/sim/model/ec130/info_dialog_active") ) {
              setprop("/sim/model/ec130/info_dialog_active",0);
            }
            ec130.model_info_dialog.toggle();
          </script>
					</binding>
				</mod-alt>
			</key>
			<key n="112">
				<name>Alt-p</name>
				<desc>Supply External Power</desc>
				<mod-alt>
					<binding>
						<command>nasal</command>
						<script>ec130.toggle_powersupply()</script>
					</binding>
					<mod-ctrl>
						<name>AltGr-p</name>
						<desc>toggle Fuel Pump</desc>
						<binding>
							<condition>
								<property>systems/electrical/volts</property>
							</condition>
							<command>property-toggle</command>
							<property>/controls/fuel/tank/boost-pump</property>
						</binding>
					</mod-ctrl>
				</mod-alt>
			</key>
			<!-- disable w-binding -->
			<key n="119">
				<name>w</name>
				<desc>w-Key</desc>
				<binding>
					<command>nasal</command>
					<script>
						<!-- disable binding -->
					</script>
				</binding>
			</key>
			<key n="119">
				<repeatable>false</repeatable>
				<mod-alt>
					<name>Alt-w</name>
					<desc>Toggle W/LT TST</desc>
					<binding>
						<command>property-toggle</command>
						<property>controls/electric/warningtest</property>
					</binding>
				</mod-alt>
				<mod-up>
					<binding>
						<command>property-assign</command>
						<property>controls/electric/warningtest</property>
						<value>0</value>
					</binding>
				</mod-up>
			</key>
			<!-- controls for hook -->
			<key n="111">
				<name>o</name>
				<desc>Lock hook</desc>
				<binding>
					<command>nasal</command>
					<script>
            if ( getprop("sim/model/ec130/doors/hook/position-norm") ) {
              doors.doorsystem.hookexport();
              settimer( func {
                setprop("/sim/hitches/aerotow/open",0);
              }, 2);
            }
          </script>
				</binding>
				<mod-alt>
					<name>Alt-o</name>
					<desc>Configuration Options</desc>
					<binding>
						<command>nasal</command>
						<script>
           if ( getprop("gear/gear[0]/wow") ) {
             if ( getprop("/sim/model/ec130/config_dialog_active") ) {
               setprop("/sim/model/ec130/config_dialog_active",0);
             }
             ec130.config_dialog.toggle();

             <!-- toggle antenna dialog if open -->
             if ( getprop("/sim/model/ec130/antenna_dialog_active") ) {
               ec130.antenna_config_dialog.toggle();
               setprop("/sim/model/ec130/antenna_dialog_active",0);
             }

             <!-- toggle info dialog if open -->
             if ( getprop("/sim/model/ec130/info_dialog_active") ) {
               ec130.model_info_dialog.toggle();
               setprop("/sim/model/ec130/info_dialog_active",0);
             }

           } else {
             screen.log.write("Only possible on ground !!!");
           }
         </script>
					</binding>
					<mod-ctrl>
						<name>AltGr-o</name>
						<desc>Simulation Options</desc>
						<binding>
							<command>nasal</command>
							<script>ec130.options_dialog.toggle();</script>
						</binding>
					</mod-ctrl>
				</mod-alt>
			</key>
			<key n="79">
				<name>O</name>
				<desc>Open hook</desc>
				<binding>
					<command>nasal</command>
					<script>
            if ( !getprop("sim/model/ec130/doors/hook/position-norm") ) {
              setprop("/sim/hitches/aerotow/open",1);
              doors.doorsystem.hookexport();
            }
          </script>
				</binding>
			</key>
			<key n="15">
				<name>Ctrl-o</name>
				<desc>Find load for aerotow</desc>
				<binding>
					<command>property-assign</command>
					<property>/controls/aerotow/find-aircraft</property>
					<value type="bool">true</value>
				</binding>
				<mod-up>
					<binding>
						<command>property-assign</command>
						<property>/controls/aerotow/find-aircraft</property>
						<value type="bool">false</value>
					</binding>
				</mod-up>
			</key>
			<!-- trimming -->
			<key n="116">
				<name>t</name>
				<desc>Direct Trim Elev./Aileron</desc>
				<repeatable type="bool">true</repeatable>
				<binding>
					<command>nasal</command>
					<script><!-- set trim -->
          setprop("/controls/flight/elevator-trim", getprop("/controls/flight/elevator")+getprop("/controls/flight/elevator-trim"));
          setprop("/controls/flight/aileron-trim", getprop("/controls/flight/aileron")+getprop("/controls/flight/aileron-trim"));
          <!-- center stick -->
          setprop("/controls/flight/aileron", 0);
          setprop("/controls/flight/elevator", 0);
        </script>
				</binding>
				<mod-alt>
					<name>Alt-t</name>
					<desc>Twist Grip +</desc>
					<binding>
						<command>nasal</command>
						<script>ec130.adjust_twist_grip(1);</script>
					</binding>
					<mod-ctrl>
						<name>AltGr-t</name>
						<desc>Twist Grip -</desc>
						<binding>
							<command>nasal</command>
							<script>ec130.adjust_twist_grip(-1);</script>
						</binding>
					</mod-ctrl>
				</mod-alt>
			</key>
			<key n="84">
				<name>T</name>
				<desc>Direct Trim Rudder</desc>
				<binding>
					<command>nasal</command>
					<script><!-- set trim -->
          setprop("/controls/flight/rudder-trim", getprop("/controls/flight/rudder")+getprop("/controls/flight/rudder-trim"));
          <!-- center stick -->
          setprop("/controls/flight/rudder", 0);
        </script>
				</binding>
			</key>
			<!-- doesn't seem to work for RC radio -->
			<key n="102">
				<name>f</name>
				<desc>Force Trim Release</desc>
				<binding>
					<command>nasal</command>
					<script>ec130.ftr_start()</script>
				</binding>
				<mod-up>
					<binding>
						<command>nasal</command>
						<script>ec130.ftr_stop()</script>
					</binding>
				</mod-up>
			</key>
			<key n="125">
				<name>}</name>
				<desc>Start Engines</desc>
				<binding>
					<command>nasal</command>
					<script>ec130.autostart()</script>
					<condition>
						<property>/sim/signals/fdm-initialized</property>
					</condition>
				</binding>
			</key>
			<key n="123">
				<name>{</name>
				<desc>Shutdown Engines</desc>
				<binding>
					<command>nasal</command>
					<script>ec130.autoshutdown()</script>
					<condition>
						<property>/sim/signals/fdm-initialized</property>
					</condition>
				</binding>
			</key>
			<!-- overdef default for Cockpit View handling -->
			<key n="22">
				<name>Ctrl-v</name>
				<desc>Select Cockpit View (View 0)</desc>
				<binding>
					<command>nasal</command>
					<script>ec130.set_pilot_view()</script>
				</binding>
			</key>
		</keyboard>
	</input>
	<systems>
		<electrical>
			<volts type="double">0.0</volts>
		</electrical>
	</systems>
	<nasal>
		<FG1000>
			<file>Aircraft/ec130/Nasal/FGUK1000.nas</file>
		</FG1000>
		<doors>
			<file>Aircraft/ec130/Nasal/doors.nas</file>
		</doors>
	<!--	<formation>
			<file>Aircraft/Generic/formation.nas</file>
		</formation>-->
		<ELT>
			<file>Aircraft/ec130/Models/Instruments/Breakers/ELTmessage.nas</file>
		</ELT>
		<ec130>
			<file>Aircraft/ec130/Nasal/ec130.nas</file>
			<file>Aircraft/ec130/Nasal/rotorwash.nas</file>
			<file>Aircraft/ec130/Nasal/limits.nas</file>
		<file>Aircraft/ec130/Nasal/Electrical.nas</file>
			<file>Aircraft/ec130/Systems/kcs55.nas</file>
			<file>Aircraft/ec130/Models/Instruments/VEMD/VEMD.nas</file>
			<file>Aircraft/ec130/Models/Instruments/CWS/CWS.nas</file>
			<file>Aircraft/ec130/Models/Instruments/AI/AI.nas</file>
			<file>Aircraft/ec130/Models/SearchLight/searchlight.nas</file>
			<script><![CDATA[
              KCS55.new();
            ]]><!-- disable standard fuel-payload menu, use aircraft specific -->
        gui.menuEnable("fuel-and-payload",0);

        <!-- init config dialog flag -->
        setprop("/sim/model/ec130/config_dialog_active",0);

        <!-- init antenna dialog flag -->
        setprop("/sim/model/ec130/antenna_dialog_active",0);

        <!-- init info dialog flag -->
        setprop("/sim/model/ec130/info_dialog_active",0);

        <!-- initialize number of flights -->
        if ( getprop("/sim/model/ec130/flightnumber") == nil ) {
          setprop("/sim/model/ec130/flightnumber", 0);
        }

        <!-- minimum number of flights for autostart/autoshutdown -->
        setprop("/sim/model/ec130/minflights",1);

        <!-- disable autostart menu, if less than minimum flights -->
        <!-- cross-check menubar definition -->
        if ( getprop("/sim/model/ec130/flightnumber") &lt; getprop("/sim/model/ec130/minflights") ) {
          setprop("/sim/menubar/default/menu[10]/item[4]/enabled",0);
        }

        <!-- menu label dependent on variant -->
        if ( getprop("/sim/model/variant") == "1" ) {
          setprop("/sim/menubar/default/menu[10]/label","EC130-B4");
        } else {
          setprop("/sim/menubar/default/menu[10]/label","H130");
        }
        var args = {'subsystem':'gui'};
        fgcommand("reinit",args);

        <!-- disable autoshutdown menu, if less than minimum flights -->
        <!-- cross-check menubar definition -->
        if ( getprop("/sim/model/ec130/flightnumber") &lt; getprop("/sim/model/ec130/minflights") ) {
          setprop("/sim/menubar/default/menu[10]/item[5]/enabled",0);
        }

        <!-- initialize equipment,seats,views, luggage -->
        ec130.aircraft_init();

        <!-- initialize stretcher position -->
        setprop("/controls/seat/stretcher/position-deg",0);

        <!-- initialize ELT -->
        setprop("/ELT/test",0);
        setprop("/ELT/armed",0);

        <!-- init searchlight props with delay
             otherwise Nasal error is raised   -->
        setlistener("/sim/signals/fdm-initialized", func {
          settimer(func { ec130.slight_init(); }, 1);
        });

        <!-- engine -->
        setprop("/engines/engine/oil-pressure-low",0);
        setprop("/engines/engine/oil-pressure-norm",0);
        setprop("/engines/engine/oil-pressure-bar",0);
        setprop("/controls/engines/engine/cutoff-norm",1);
        setprop("/controls/engines/engine/cutoffguard",0);

        <!-- disable shadow if rembrandt enabled -->
        if ( getprop("/sim/rendering/rembrandt/enabled")) {
          setprop("sim/model/ec130/shadow",0);
        }

        <!-- set directory for formations -->
        #setprop("sim/formation/path","Aircraft/ec130/Models/Formations");

        <!-- deactivate formation handling
           it is activated by the last wingman at load time
        -->
        <!-- should be initialized in preferences.xml -->
       # setprop("/sim/formation/override",1);
       # setprop("/sim/formation/delayed",1);

        <!-- set first formation -->
       # setprop("/sim/model/formation/variant","Row");

      </script>
		</ec130>
		<gtx328>
			<file>Models/Instruments/GTX328/gtx328.nas</file>
		</gtx328>
	<!--	<canvas_vemd>
			<file>Models/Instruments/VEMD/vemd_canvas.nas</file>
		</canvas_vemd>
		-->
		<file>Aircraft/ec130/Models/Instruments/VEMD/VEMD.nas</file>
		
		<kx165a>
		 <file>Aircraft/ec130/Nasal/kx165a.nas</file>
		</kx165a>

	<fgukelectrical>
		<file>Aircraft/ec130/Nasal/fgukelectrical.nas</file>
		</fgukelectrical>
	
	</nasal>
	<rotors>
		<main>
			<rpm type="double">0</rpm>
			<wakevisible type="double">2</wakevisible>
		</main>
	</rotors>
</PropertyList>