ec130/Systems/autopilot-H.xml

<?xml version="1.0"?>
 
<!-- Generic Autopilot Configuration -->

<!-- Each component is evaluated in the order specified.  You can make up -->
<!-- property names to pass the result of one component on to a subsequent -->
<!-- component. -->


<PropertyList>



  <!-- =============================================================== -->
  <!-- Roll Axis Modes                                                 -->
  <!-- =============================================================== -->

   <!-- Wing leveler --> 
  <pid-controller>
    <name>Wing Leveler (Turn Coordinator based)</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>wing-leveler</value>
    </enable>
  <input>
      <prop>/instrumentation/magnetic-compass/indicated-heading-deg</prop>
    </input>
    <reference>
      <value>0.0</value>
    </reference>
    <output>
      
	  <prop>/controls/flight/fcs/yaw</prop>
    </output>
     <config>
      <Kp>-1.0</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>     <!-- input value weighing factor -->
      <alpha>0.1</alpha>   <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>   <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
      <Ti>3.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>     <!-- derivator time -->
      <u_min>-20.0</u_min> <!-- minimum output clamp -->
      <u_max>20.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- Heading Bug Hold.  2 stage cascade controller. -->

  <!-- Stage #1 sets target roll based on diff between current heading -->
  <!-- and heading bug. -->
  <pid-controller>
    <name>Heading Bug Hold (DG based) Stage 1</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>dg-heading-hold</value>
    </enable>
    <input>
      <prop>/autopilot/internal/heading-bug-error-deg</prop>
    </input>
    <reference>
      <value>0.0</value>
    </reference>
    <output>
      <prop>/autopilot/internal/target-roll-deg</prop>
    </output>
    <config>
      <Kp>-1.0</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>     <!-- input value weighing factor -->
      <alpha>0.1</alpha>   <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>   <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>     <!-- derivator time -->
      <u_min>-20.0</u_min> <!-- minimum output clamp -->
      <u_max>20.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- Stage #2 drives the ailerons to achieve the desired roll deg. -->
  <pid-controller>
    <name>Heading Bug Hold (DG based) Stage 2</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>dg-heading-hold</value>
    </enable>
    <input>
      <prop>/orientation/roll-deg</prop>
    </input>
    <reference>
      <prop>/autopilot/internal/target-roll-deg</prop>
    </reference>
    <output>
        <prop>/controls/flight/fcs/roll</prop>
	 
    </output>
    <config>
      <Kp>0.1</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>
  
   <pid-controller>
    <name>Heading Bug Hold (DG based) Stage 1</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>dg-heading-hold</value>
    </enable>
    <input>
      <prop>/autopilot/internal/heading-bug-error-deg</prop>
    </input>
    <reference>
      <value>0.0</value>
    </reference>
    <output>
      <prop>/autopilot/internal/target-yaw-deg</prop>
    </output>
    <config>
      <Kp>-1.0</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>     <!-- input value weighing factor -->
      <alpha>0.1</alpha>   <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>   <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
      <Ti>5.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>     <!-- derivator time -->
      <u_min>-20.0</u_min> <!-- minimum output clamp -->
      <u_max>20.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>
  
  
   <pid-controller>
    <name>Heading Bug Hold (DG based) Stage 2</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>dg-heading-hold</value>
    </enable>
    <input>
      <prop>/orientation/yaw-deg</prop>
    </input>
    <reference>
      <prop>/autopilot/internal/target-yaw-deg</prop>
    </reference>
    <output>
       
	  <prop>/controls/flight/fcs/yaw</prop>
    </output>
    <config>
      <Kp>0.1</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- True Heading hold.  2 stage cascade controller. -->

  <!-- Stage #1 sets target roll based on diff between current heading -->
  <!-- and target heading. -->
  <pid-controller>
    <name>True Heading Hold (DG based) Stage 1</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>true-heading-hold</value>
    </enable>
    <input>
      <prop>/autopilot/internal/true-heading-error-deg</prop>
    </input>
    <reference>
      <value>0.0</value>
    </reference>
    <output>
      <prop>/autopilot/internal/target-roll-deg</prop>
    </output>
    <config>
      <Kp>-1.0</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>     <!-- input value weighing factor -->
      <alpha>0.1</alpha>   <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>   <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>     <!-- derivator time -->
      <u_min>-20.0</u_min> <!-- minimum output clamp -->
      <u_max>20.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- Stage #2 drives the ailerons to achieve the desired roll deg. -->
  <pid-controller>
    <name>True Heading Hold (DG based) Stage 2</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>true-heading-hold</value>
    </enable>
    <input>
      <prop>/orientation/roll-deg</prop>
    </input>
    <reference>
      <prop>/autopilot/internal/target-roll-deg</prop>
    </reference>
    <output>
        <prop>/controls/flight/fcs/roll</prop>
	  <prop>/controls/flight/fcs/yaw</prop>
    </output>
    <config>
      <Kp>0.1</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- Nav1 hold.  2 stage cascade controller. -->

  <!-- Stage #1 sets target roll based on diff between current heading -->
  <!-- and target heading. -->
  <pid-controller>
    <name>Nav1 Hold Stage 1</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>nav1-hold</value>
    </enable>
    <input>
      <prop>/autopilot/internal/nav1-heading-error-deg</prop>
    </input>
    <reference>
      <value>0.0</value>
    </reference>
    <output>
      <prop>/autopilot/internal/target-roll-deg</prop>
    </output>
    <config>
      <Kp>-1.0</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>     <!-- input value weighing factor -->
      <alpha>0.1</alpha>   <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>   <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>     <!-- derivator time -->
      <u_min>-20.0</u_min> <!-- minimum output clamp -->
      <u_max>20.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- Stage #2 drives the ailerons to achieve the desired roll deg. -->
  <pid-controller>
    <name>Nav1 Hold Stage 2</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/heading</prop>
      <value>nav1-hold</value>
    </enable>
    <input>
      <prop>/orientation/roll-deg</prop>
    </input>
    <reference>
      <prop>/autopilot/internal/target-roll-deg</prop>
    </reference>
    <output>
        <prop>/controls/flight/fcs/roll</prop>
	  <prop>/controls/flight/fcs/yaw</prop>
    </output>
    <config>
      <Kp>0.1</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>


 <!-- =============================================================== -->
 <!-- Pitch Axis Modes                                                -->
 <!-- =============================================================== -->

 <filter>
  <name>Pitch Hold</name>
  <type>gain</type>
  <debug>false</debug>
  <enable>
   <condition>
	<equals>        
	 <property>/autopilot/locks/altitude</property>
	 <value>pitch-hold</value>
	</equals>
   </condition>
  </enable>
  <input>
   <property>/autopilot/settings/target-pitch-deg</property>
   <value>0</value>
  </input>
  <output>
   <property>/autopilot/internal/target-pitch-deg</property>
  </output>
  <gain>1.0</gain>
  <u_min>-70.0</u_min>
  <u_max>70.0</u_max>
 </filter>
 
 <pid-controller>
 <name>Altitude Hold Computer</name>
 <debug>false</debug>
 <enable>
   <condition>
	<equals>        
	 <property>/autopilot/locks/altitude</property>
	 <value>altitude-hold</value>
	</equals>
   </condition>
  </enable>
  <input>
   <property>/position/altitude-ft</property>
  </input>
  <reference>
   <property>/autopilot/settings/target-altitude-ft</property>
  </reference>
  <output>
   <property>/autopilot/internal/target-pitch-deg</property>
  </output>
   <config>
     <Kp>0.075</Kp>        <!-- proportional gain -0.01 -->
    <beta>1.0</beta>       <!-- input value weighing factor -->
    <alpha>0.5</alpha>     <!-- low pass filter weighing factor -->
    <gamma>0.0</gamma>     <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
    <Ti>7.5</Ti>          <!-- integrator time  10.0 -->
    <Td>0.0001</Td>       <!-- derivator time -->
    <u_min>-6.0</u_min>  <!-- minimum output clamp -->
    <u_max>6.0</u_max>   <!-- maximum output clamp -->
   </config>
  </pid-controller>
  
  <pid-controller>
 <name>Altitude TFR Computer</name>
 <debug>false</debug>
 <enable>
   <condition>
	<equals>        
	 <property>/autopilot/locks/altitude</property>
	 <value>agl-hold</value>
	</equals>
   </condition>
  </enable>
  <input>
   <property>/position/altitude-agl-ft</property>
  </input>
  <reference>
   <property>/autopilot/settings/target-agl-ft</property>
  </reference>
  <output>
   <property>/autopilot/internal/target-pitch-deg</property>
  </output>
   <config>
     <Kp>0.075</Kp>        <!-- proportional gain -0.01 -->
    <beta>1.0</beta>       <!-- input value weighing factor -->
    <alpha>0.5</alpha>     <!-- low pass filter weighing factor -->
    <gamma>0.0</gamma>     <!-- input value weighing factor for -->
                           <!-- unfiltered derivative error -->
    <Ti>7.5</Ti>          <!-- integrator time  10.0 -->
    <Td>0.0001</Td>       <!-- derivator time -->
    <u_min>-10.0</u_min>  <!-- minimum output clamp -->
    <u_max>15.0</u_max>   <!-- maximum output clamp -->
   </config>
  </pid-controller>
  
   <pid-controller>
  <name>System Command: Pitch</name>
  <debug>false</debug>
  <enable>
   <condition>
    <not-equals>
	<property>/autopilot/locks/altitude</property>
	<value />
	</not-equals>
   </condition>
  </enable>
  <input>
   <property>/orientation/pitch-deg</property>
  </input>
  <reference>
   <property>/autopilot/internal/target-pitch-deg</property>
  </reference>
  <output>
   <property>/controls/flight/elevator</property>
  </output>
  <config>
   <Kp>-0.05</Kp>      
   <beta>1.0</beta>    <!-- input value weighing factor -->
   <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
   <gamma>0.0</gamma>  <!-- input value weighing factor for -->
   <Ti>20.0</Ti>       <!-- integrator time  10.0 -->
   <Td>0.00001</Td>    <!-- derivator time -->
   <u_min>-0.35</u_min> <!-- minimum output clamp -->
   <u_max>0.35</u_max>
  </config>
 </pid-controller>
 
 <!-- vertical speed hold -->
  <pid-controller>
    <name>Vertical Speed Hold</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/altitude</prop>
      <value>vertical-speed-hold</value>
    </enable>
    <input>
      <prop>/velocities/vertical-speed-fps</prop>
    </input>
    <reference>
      <prop>/autopilot/settings/vertical-speed-fpm</prop>
      <scale>0.01667</scale>
    </reference>
    <output>
      <prop>/controls/flight/elevator-trim</prop>
    </output>
    <config>
      <Kp>-0.0025</Kp>      <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- Glideslope hold. -->

  <!-- Stage #2 drives the elevator-trim to achieve the desired climb rate. -->
  <pid-controller>
    <name>Glideslop Hold</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/altitude</prop>
      <value>gs1-hold</value>
    </enable>
    <input>
      <prop>/velocities/vertical-speed-fps</prop>
    </input>
    <reference>
      <prop>/instrumentation/nav[0]/gs-rate-of-climb</prop>
    </reference>
     <output>
      <prop>/controls/flight/elevator-trim</prop>
    </output>
    <config>
      <Kp>-0.01</Kp>      <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

  <!-- vertical speed hold -->
  <pid-controller>
    <name>Vertical Speed Hold</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/altitude</prop>
      <value>vertical-speed-hold</value>
    </enable>
    <input>
      <prop>/velocities/vertical-speed-fps</prop>
    </input>
    <reference>
      <prop>/autopilot/settings/vertical-speed-fpm</prop>
      <scale>0.01667</scale>
    </reference>
    <output>
      <prop>/controls/flight/elevator-trim</prop>
    </output>
    <config>
      <Kp>-0.01</Kp>      <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>


 <!-- =============================================================== -->
 <!-- Velocity Modes                                                  -->
 <!-- =============================================================== -->

 <!-- Auto throttle --> 
 <pid-controller>
    <name>Auto Throttle (5 sec lookahead)</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/speed</prop>
      <value>speed-with-throttle</value>
    </enable>
    <input>
      <!-- <prop>/autopilot/internal/lookahead-5-sec-airspeed-kt</prop> -->
      <prop>/velocities/airspeed-kt</prop>
    </input>
    <reference>
      <prop>/autopilot/settings/target-speed-kt</prop>
    </reference>
    <output>
      <prop>/controls/engines/engine[0]/throttle</prop>
      <prop>/controls/engines/engine[1]/throttle</prop>
      <prop>/controls/engines/engine[2]/throttle</prop>
      <prop>/controls/engines/engine[3]/throttle</prop>
      <prop>/controls/engines/engine[4]/throttle</prop>
      <prop>/controls/engines/engine[5]/throttle</prop>
      <prop>/controls/engines/engine[6]/throttle</prop>
      <prop>/controls/engines/engine[7]/throttle</prop>
    </output>
    <config>
      <Kp>0.1</Kp>        <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>10.0</Ti>       <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>0.0</u_min>  <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

 <!-- Hold speed by varying pitch trim (Two stage cascading controller) --> 
 <pid-controller>
    <name>Speed hold (vary pitch trim) Stage #1</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/speed</prop>
      <value>speed-with-pitch-trim</value>
    </enable>
    <input>
      <prop>/autopilot/internal/lookahead-5-sec-airspeed-kt</prop>
    </input>
    <reference>
      <prop>/autopilot/settings/target-speed-kt</prop>
    </reference>
    <output>
      <prop>/autopilot/settings/target-pitch-deg</prop>
    </output>
    <config>
      <Kp>-1.0</Kp>       <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>1.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-15.0</u_min><!-- minimum output clamp -->
      <u_max>15.0</u_max> <!-- maximum output clamp -->
    </config>
  </pid-controller>

 <pid-controller>
    <name>Speed hold (vary pitch trim) Stage #2</name>
    <debug>false</debug>
    <enable>
      <prop>/autopilot/locks/speed</prop>
      <value>speed-with-pitch-trim</value>
    </enable>
    <input>
      <prop>/orientation/pitch-deg</prop>
    </input>
    <reference>
      <prop>/autopilot/settings/target-pitch-deg</prop>
    </reference>
    <output>
      <prop>/controls/flight/elevator-trim</prop>
    </output>
    <config>
      <Kp>-0.05</Kp>      <!-- proportional gain -->
      <beta>1.0</beta>    <!-- input value weighing factor -->
      <alpha>0.1</alpha>  <!-- low pass filter weighing factor -->
      <gamma>0.0</gamma>  <!-- input value weighing factor for -->
                          <!-- unfiltered derivative error -->
      <Ti>1.0</Ti>        <!-- integrator time -->
      <Td>0.00001</Td>    <!-- derivator time -->
      <u_min>-1.0</u_min> <!-- minimum output clamp -->
      <u_max>1.0</u_max>  <!-- maximum output clamp -->
    </config>
  </pid-controller>

</PropertyList>