Start Up This tutorial will take you through the engine startup sequence for the Vulcan. This is based ona startup using a ground cart to provide power. Aircraft/vulcanb2/Tutorials/ morning /controls/gear/brake-parking 1 /controls/flight/flaps 0.0 /instrumentation/adf/frequencies/selected-khz 340 /controls/flight/elevator-trim 0.17 # Reset to a cold start. starter.setMasterOff(); In this tutorial, we'll start up the engines on the Vulcan. This is the engine start console. 67.5 -49.1 0.0 -0.3 1.1 4.8 26.4 4.6875 -0.6358 0.5442 4.9833 First, switch the engine master ON, by selecting this switch. 69.5 -53.2 0.0 -0.3 1.1 4.8 14.4 4.6742 -0.6167 0.5292 1.1500 Select the engine master switch /controls/engines/master 1 /controls/engines/master 1 This is the engine start selector switch. Currently engine #1 is selected. 69.5 -53.2 0.0 -0.3 1.1 4.8 14.4 4.7058 -0.6492 0.5308 2.1333 Start the engine by selecting the start button. 69.5 -53.2 0.0 -0.3 1.1 4.8 14.4 4.6583 -0.6492 0.5308 1.8167 The start button will rise when the engine has started. Watch as the RPM rises. 345.7 -24.0 0.0 -0.2 1.1 4.8 25.3 4.1450 -0.1400 0.7217 3.2000 The other engines may be starting in turn by clicking on the engine selector switch, and pressing the start button.